 |
| Quantity: | |
|---|---|
YFR supplies quartz ultraviolet lamps for industrial curing, printing, coating and surface-treatment equipment. UV lamps are produced for new installations and replacement projects where the lamp must match the original electrical rating, arc length, end structure and cooling system.
The correct replacement should be selected from technical data rather than appearance alone. Two lamps with similar overall length may use different power, electrode spacing, caps or connectors and may not operate correctly with the same ballast.
Curing printing ink on paper, board, plastic film and packaging materials.
Curing varnish, lacquer and protective coatings.
Adhesive bonding and assembly processes.
Surface treatment and selected industrial photochemical processes.
Replacement lamps for printing presses and UV curing modules.
Suitability depends on the ink, coating or adhesive chemistry and on the spectral output required by the process. The lamp must also operate with the machine’s ballast, reflector, shutter and cooling arrangement.
| Item | Information to provide |
|---|---|
| Original identification | Lamp code, machine model and equipment manufacturer |
| Electrical data | Rated power, voltage where specified, and ballast information |
| Dimensions | Total length, arc length, tube diameter and electrode position |
| End structure | Cap type, ceramic ends, pins, cables and connectors |
| Operating system | Reflector, shutter, cooling method and mounting orientation |
| Process | Ink, coating or adhesive type and production speed |
For a replacement, send clear photos of the whole lamp and both ends, together with the original label or part number. If the lamp is damaged, an undamaged sample, machine manual or previous purchase record can reduce identification risk. For a custom lamp, provide a dimensioned drawing and the electrical and process requirements.
UV lamps must be installed and operated in properly shielded equipment.
Avoid direct eye or skin exposure to operating UV radiation.
Disconnect power and allow the lamp to cool before service.
Do not touch the quartz with bare hands; clean contamination with an appropriate lint-free method.
Follow local requirements for handling and disposal of mercury-containing lamps.
Browse the YFR UV lamp range or review contact information for replacement support.
Contact YFR with your lamp code, machine model and photos. Compatibility will be checked before production.
