 |
| Quantity: | |
|---|---|
The YFR outdoor infrared heater provides directed radiant heat for patios, terraces, workstations and other areas where warming the occupied zone is more practical than heating a large volume of surrounding air. The product is available in wall-mounted or freestanding arrangements, with mechanical or remote-control options depending on the selected configuration.
An anodized extruded aluminium-alloy housing, aluminium reflector and gold infrared heating tube form the core of the heater. The reflector directs useful radiation toward the target area, while the housing supports installation in demanding commercial or industrial environments. The listed IP65 protection level applies to the configured product; the final installation must still follow local electrical rules, mounting clearances and the operating instructions supplied with the heater.
Directed infrared heating for occupied zones and defined work areas.
Wall-mounted and freestanding installation options.
Mechanical control or remote-control configurations.
Anodized extruded aluminium-alloy housing.
Aluminium reflector with a gold infrared heating tube.
IP65 protection for the specified heater configuration.
| Option | Best suited to | Points to confirm |
|---|---|---|
| Wall-mounted heater | Permanent heating zones with a suitable wall or structural mounting point | Mounting height, heater angle, wall strength, electrical route and required clearances |
| Freestanding heater | Flexible layouts where the heater may need to be repositioned | Base stability, cable routing, pedestrian access and placement away from obstructions |
| Mechanical control | Simple local operation | Switch position, user access and operating sequence |
| Remote control | Convenient adjustment without direct access to the heater | Control functions, operating distance and site requirements |
The final option set depends on the product model. Confirm the required mounting and control arrangement before ordering so that the heater, brackets and electrical configuration match the intended site.
This heater can be evaluated for commercial, residential and industrial locations that need local radiant warmth, including:
Restaurant, café and hotel terraces.
Patios, balconies and covered outdoor seating areas.
Workshop stations, inspection areas and loading zones.
Reception, waiting or service areas exposed to cool airflow.
Temporary or seasonal heating zones using a freestanding arrangement.
Open outdoor spaces, strong airflow, mounting height and distance from the occupied zone all influence heating performance. For that reason, the area dimensions and installation conditions should be reviewed before the heater quantity and placement are selected.
To match the heater to the application, please provide the installation location, approximate area, wall-mounted or freestanding preference, mounting height, available electrical supply and preferred control method. Photos or a simple layout drawing are useful when several heaters must cover one seating or work area.
Also confirm whether the location is fully outdoors, covered, exposed to wind or close to doors and other sources of airflow. These details help determine a practical heater position and reduce the risk of selecting a configuration that cannot deliver heat where people are located.
Installation and electrical connection should be completed by qualified personnel.
Follow the supplied mounting distances and keep the heater clear of combustible materials.
Do not cover the heater or obstruct the front of the reflector.
Disconnect the power supply before cleaning, inspection or maintenance.
Confirm that the selected model and IP rating are suitable for the actual installation environment.
Browse our infrared heating systems and controls for related solutions. If you are choosing heaters for a patio, workshop or commercial area, send the site dimensions, photos and mounting conditions so that the layout can be reviewed.
Contact YFR for an outdoor infrared heater recommendation. The final model, electrical specification, mounting method and control option will be confirmed for your project.
